| aak | -- 06-06-2026 @ 7:31 AM |
|
My Ford 3W coupe is a Right Hand Drive (RHD) the Engine Number is *CA93292* As per https://mafca.com/engines-canada/ this engine was manufactured in Canada in Feb 1929. The grill that came with the car is also from a Model A. However the body seems original and is a 3 Window RHD coupe with tire holders on both fenders and a rambler seat. The front window is slanted and has the air vent on the hood. We are trying to find the VIN number but cant find it in the usual places. The papers say the VIN is 19415 but we have to still find that on the body. Will remove from the chassis to have a look under. It's not on the frame rail. so will remove the body from the frame to try and find it. The car is located in Pakistan so it was a commonwealth country export from Canada. I have attached pics. If any info will be helpful.
|
|
| Rockfla | -- 06-18-2026 @ 7:38 AM |
|
There are a few locations on the frame where the engine log number would be...I have attached a photo that "should" help you. ALSO "IF" the transmission is "original" to the car it should also be stamped in the upper section on the bell housing of the transmission.
|
|
| 40 Coupe | -- 06-29-2026 @ 5:25 AM |
|
The firewall may have a body number plate also look at the seat riser. If so post the full number. photo below is a 32 3-W from Canada.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=19&Topic=18131 |