| nwjm | -- 12-06-2023 @ 8:21 AM |
|
Where would I purchase a complete set of engine block to cylinder head studs? They were missing when I acquired my 32 block.
|
|
| carcrazy | -- 12-06-2023 @ 8:59 AM |
|
Contact VanPelt. http://www.vanpeltsales.com/FH_web/engine-partsprices-pg1.htm
|
|
| nwjm | -- 12-06-2023 @ 2:59 PM |
|
Thank you.
|
|
| 3w2 | -- 12-06-2023 @ 6:04 PM |
|
Be prepared to be a little disappointed as to the best of my knowledge, no one offers head studs in the three original '32 lengths of 18-6065, 6066, and 6067, but rather 40-6065, 6066, and 6067. The difference is that the 40-prefix studs are all longer to compensate for the washers used with aluminum heads, which were not used with '32 V8 cast iron heads.
|
|
| 39 Ken | -- 12-07-2023 @ 6:36 AM |
|
Give Fred Willner a call. He may have what you need. Fred Willner Southside Obsolete Faribault, MN 507-332-6789 southsideobsolete@gmail.com
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=19&Topic=16798 |