| MICHV8 | -- 04-17-2025 @ 6:30 AM |
|
Just want to verify that I should shim the 3 arms in their current position before removing the 6 pressure plate bolts? Thanks
|
|
| pauls39coupe | -- 04-17-2025 @ 6:23 PM |
|
Yes, use a small nut to act as a shim on each of the fingers. I keep them strung together with wire so they don't drop into the pressure plate when you re-install it. Paul
|
|
| MICHV8 | -- 04-18-2025 @ 5:47 AM |
|
thanks!
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=17545 |