| Scruffy | -- 07-19-2024 @ 10:59 AM |
|
1939 Ford- deep dish hubcaps- because the spring steel clips being slightly bent I will have a hubcap come off and roll down the road. Several clips are missing as well. I am concerned about heating them and bending back. Maybe super glue shims to tighten connections?? Would appreciate thoughts on this.
|
|
| 51504bat | -- 07-19-2024 @ 1:13 PM |
|
Drake has these replacements https://bobdrake.com/products/1936-39-car-pu-1939-47-com-wheel-spider-clips?_pos=1&_sid=7a1fe9838&_ss=r ______________ No signature
|
|
| Scruffy | -- 07-27-2024 @ 8:59 AM |
|
Thanks for the help
|
|
| CaliforniaBorn36 | -- 08-02-2024 @ 8:17 AM |
|
I had a 1936 with the same issue. First make sure you have all 5 clips present. I also put a few dabs of rtv around the edge of the hubcaps just as added insurance.
|
|
| flatfoot | -- 08-08-2024 @ 10:07 AM |
|
I used these on my 1936 Ford sedan and they work well. I lost a hubcap as well. This should fix the problem.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=17141 |