| Fred Hanks | -- 09-02-2013 @ 12:50 PM |
|
I don't know where the 7th bumper goes ? It is half round and has a counter sunk screw and nut thru it, looks like it should go under hood at the very front but no hole to mount it.... Any help? Thanx,Fred
|
|
| supereal | -- 09-02-2013 @ 9:06 PM |
|
Most hood bumper kits come with more of the plugs than needed, so you may have some that are not required for your vehicle.
|
|
| 51f1 | -- 09-06-2013 @ 2:03 AM |
|
These kits don't come with extras. The one in question goes at the front middle of the hood, under the "nose." Richard
|
|
| supereal | -- 09-06-2013 @ 10:42 AM |
|
The last kit I bought from Drake had seven extra bumpers in it. Maybe they all don't have them, but the last two for us did.
|
|
| 51f1 | -- 09-08-2013 @ 7:21 AM |
|
I should have said that, in my experience with kits for F-1 trucks, the kits don't come with extras. See the picture I have attached. This is the kit from Carpenter. The one in question, the big one with the screw, goes at the front middle of the hood, under the "nose." http://i250.photobucket.com/albums/gg264/rcrispd/7C-16761_zps662e5164.jpg Richard This message was edited by 51f1 on 9-8-13 @ 7:33 AM
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=17&Topic=6488 |