| TwoDuckDad | -- 06-25-2024 @ 3:16 PM |
|
Hi, new to this forum. My dad rebuilt a 41 Ford Pickup 30 years ago. He is now 93 and unable to drive or remember many details of the restomod. It was a frame off job. He put a Chevy 350 engine, turbo 350 tranny, Ranger rear end, etc. Couple questions for the forum gurus: Dad had peep mirrors mounted to the door. I hate them. Want to add hinge mounted mirrors. I like the curved mirrors I've seen on other 41 Ford Pickups but cannot find them online. I found straight stem options but not the curved version. Any thoughts pro or con on this type of mirror? Where can I get a set? I also want to put a proper cab mounted rear view mirror. The two trim tubular pieces are above the windshield with a hole but nothing behind the hole to receive a mounting screw. What is supposed to be inside the tube to receive the screws?
|
|
| 51504bat | -- 06-25-2024 @ 5:30 PM |
|
Nice truck but you might fit in better on the Ford Barn https://www.fordbarn.com/forum/forumdisplay.php?f=4 Or the HAMB https://www.jalopyjournal.com/forum/forums/the-hokey-ass-message-board.5/ You can join either forum very easily but suggest you read the forum rules for the HAMB and introduce your self before asking your questions. ______________ No signature
|
|
| carcrazy | -- 06-25-2024 @ 7:58 PM |
|
Dennis Carpenter offers these hinge pin mounted rear view mirrors which should fit your 1941 Ford Pickup. https://www.dennis-carpenter.com/trucks/door/door-hinges/48-18403-hinge-pin-mirror-wchrome-hing
|
|
| TwoDuckDad | -- 06-25-2024 @ 8:47 PM |
|
thanks. I'll check em out.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=17&Topic=17107 |