| Kenneth M. | -- 02-01-2015 @ 10:01 AM |
|
I cannot get the lock cylinder to lock itself in the Trunk handle. What wrong that it won't stay in? Kenneth M. Stewart
|
|
| trjford8 | -- 02-01-2015 @ 6:10 PM |
|
I think there is a pin that should hold it in. If it's a repo handle your problem is not uncommon.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=14&Topic=8161 |