| Occaswright | -- 04-23-2025 @ 9:18 PM |
|
Two jacks of the attached design came with my 1940/41 1/2 ton pickup. They look nothing like the bumper jacks used on the car line. Are they correct for the truck? If so, how are they used? Placement? If not, what does the correct jack look like? What might these jacks go to? Thanks This message was edited by Occaswright on 4-24-25 @ 4:14 AM
|
|
| kubes40 | -- 04-24-2025 @ 5:41 PM |
|
The correct jack and handle appear like this. I do not have a better photo of the operating "handle" but this should at least give you a good idea what you are searching for. Good luck. They are rare. I'm fairly certain your jack is earlier passenger car, perhaps '34? Mike "Kube" Kubarth This message was edited by kubes40 on 4-24-25 @ 5:42 PM
|
|
| Occaswright | -- 04-24-2025 @ 11:09 PM |
|
Thank you! Very Helpful
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=14&Topic=17557 |