| 41fatty | -- 03-02-2025 @ 11:19 AM |
|
i,ve learned the hard way that the only rear cable assembly to properly fit in a 41 ford Coupe is a 99A-2275 @ 106.25 in. , not 21A-2275@ 107.25in. that's for 42-48. the extra inch does not allow for any adjustment. (too long) Does anyone supply this one year only cable?
|
|
| 51504bat | -- 03-02-2025 @ 12:22 PM |
|
Try Fred at Southside Obsolete https://southsideobsolete.com/ southsideobsolete@gmail.com (preferred) or call 507-332-6789 ______________ No signature ______________ No signature
|
|
| kubes40 | -- 03-02-2025 @ 6:33 PM |
|
41flatty, Is this the front cable or the back one? Mike "Kube" Kubarth
|
|
| 41fatty | -- 03-03-2025 @ 5:39 AM |
|
rear
|
|
| kubes40 | -- 03-03-2025 @ 6:23 AM |
|
Just a thought... have you shortened the front cable at BOTH the lever assembly AND at the torque tube? You don't need to shorten the front a full inch to compensate for the 1" longer rear cable. Mike "Kube" Kubarth
|
|
| 41fatty | -- 03-03-2025 @ 10:51 AM |
|
but you do. full take-up at both clevis equalizers. if I only had an inch less it would be within adjustment range. still waiting for a reply from fred Wilner.
|
|
| TomC750 | -- 03-03-2025 @ 6:04 PM |
|
Or, if you can find one, a cable shortener. Hard to describe, but it goes on cable with a threaded hook with a nut on the end. The cable goes around another part of the device. Wish I had a pic! TomC750 This message was edited by TomC750 on 3-3-25 @ 6:05 PM
|
|
| 51504bat | -- 03-04-2025 @ 6:32 AM |
|
One of these? https://www.ebay.com/itm/266542407574?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1r1X-iPj1S6-Jbe2lMz6RjQ3&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=266542407574&targetid=2321310837104&device=c&mktype=pla&googleloc=9194707&poi=&campaignid=21214302385&mkgroupid=161029887581&rlsatarget=aud-1306613350219:pla-2321310837104&abcId=9407524&merchantid=8598174&gad_source=1&gclid=CjwKCAiA5pq-BhBuEiwAvkzVZbaNwVxFmMrNLiYof_M8OG85KcP7XhzZry6IFFC_UuSzK02C0S5TuhoC0ZUQAvD_BwE ______________ No signature
|
|
| 41fatty | -- 03-05-2025 @ 6:16 AM |
|
what a clever idea ! thank u. i suppose I can aquire 1 at my local auto parts store.
|
|
| employprofile | -- 04-03-2025 @ 1:18 AM |
|
I guess I can get one at my neighbourhood auto parts store. What a great idea! Thank you. https://www.ebay.com/itm/266542407574?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1r1X-iPj1S6-Jbe2lMz6RjQ3&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=266542407574&targetid=2321310837104&device=c&mktype=pla&googleloc=9194707&poi=&campaignid=21214302385&mkgroupid=161029887581&rlsatarget=aud-1306613350219:pla-2321310837104&abcId=9407524&merchantid=8598174&gad_source=1&gclid=CjwKCAiA5pq-BhBuEiwAvkzVZbaNwVxFmMrNLiYof_M8OG85KcP7XhzZry6IFFC_UuSzK02C0S5TuhoC0ZUQAvD_BwE Block Blast
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=14&Topic=17472 |